Solution to Question 15
A block of mass $m = 1.0\text{ kg}$ placed on a floor is connected at one end of a long spring of stiffness $k = 100\text{ N/m}$. Coefficient of kinetic friction between the floor and the block is $\mu_k = 0.47$. The free end of the spring is pulled gradually away from the block until the block begins to slide. If the block stops after sliding a distance $s = 6\text{ cm}$, find the coefficient of static friction between the block and the floor.
Problem Analysis:
We analyze the motion in two phases: the initial gradual pulling until sliding begins, and the subsequent sliding motion where the block travels a distance $s$ before coming to rest.
The spring is pulled gradually. Sliding begins at the exact instant the spring force $F_s$ overcomes the maximum static friction $f_{s,\max}$. Let the extension in the spring at this instant be $x_1$:
$$ k x_1 = \mu_s m g \implies x_1 = \frac{\mu_s m g}{k} \quad \text{— (1)} $$Once sliding starts, the block moves a distance $s$ and stops. Because the spring was pulled gradually until motion started, the free end of the spring remains virtually stationary during the rapid slip of the block.
Thus, the spring extension decreases from $x_1$ to $x_f = x_1 – s$. Applying the Work-Energy Theorem ($\Delta K = 0$):
$$ \Delta U_{\text{spring}} + W_{\text{friction}} = 0 $$ $$ \frac{1}{2} k x_1^2 – \frac{1}{2} k (x_1 – s)^2 = \mu_k m g s $$Factoring the left side using $a^2 – b^2 = (a-b)(a+b)$:
$$ \frac{1}{2} k [x_1 – (x_1 – s)][x_1 + (x_1 – s)] = \mu_k m g s $$ $$ \frac{1}{2} k (s)(2x_1 – s) = \mu_k m g s $$Canceling $s$ (since $s \neq 0$):
$$ 2 k x_1 – k s = 2 \mu_k m g $$Substitute $k x_1 = \mu_s m g$ from Equation (1):
$$ 2 (\mu_s m g) – k s = 2 \mu_k m g $$ $$ 2 \mu_s m g = 2 \mu_k m g + k s $$ $$ \mu_s = \mu_k + \frac{k s}{2 m g} $$Conceptual Insight:
Once the block breaks free and begins to slide, it is acted upon by a linear restoring spring force and a constant kinetic friction force $\mu_k mg$. Under a constant opposing force, the block undergoes Simple Harmonic Motion (SHM) about a shifted equilibrium (mean) position, starting from rest at one extreme position and coming to rest at the other extreme position (completing exactly half an oscillation).
During sliding, the net force on the block is zero at the mean position, where the spring force balances the kinetic friction:
$$ k x_0 = \mu_k m g $$where $x_0$ is the extension of the spring at the mean position.
The block starts from rest ($v = 0$) at the initial extreme position where the spring extension is $(x_0 + A)$, passes through the mean position, and stops ($v = 0$) at the other extreme position where the extension is $(x_0 – A)$.
Since the block completes half an oscillation between the two extremes, the total distance $s$ moved by the block is:
$$ 2A = s \implies A = \frac{s}{2} $$At the initial extreme position, the block is just on the verge of sliding, so the spring force equals the limiting static friction:
$$ k(x_0 + A) = \mu_s m g $$ $$ k x_0 + k A = \mu_s m g $$Substituting $k x_0 = \mu_k m g$ and $A = \frac{s}{2}$:
$$ \mu_k m g + k \frac{s}{2} = \mu_s m g $$ $$ \therefore \quad \mu_s = \mu_k + \frac{k s}{2 m g} $$Given: $m = 1.0\text{ kg}$, $k = 100\text{ N/m}$, $\mu_k = 0.47$, $s = 6\text{ cm} = 0.06\text{ m}$, and taking $g = 10\text{ m/s}^2$:
$$ \mu_s = 0.47 + \frac{100 \times 0.06}{2 \times 1.0 \times 10} = 0.47 + 0.30 = 0.77 $$